Pool Resurfacing in Golden Isles, FL

Transform Your Aging Pool Surface

Stop dealing with rough, stained surfaces that make your pool look tired and feel unsafe.

A worker in protective gear sprays a white coating on the interior of an empty swimming pool. He stands on the pool floor while holding a spray gun connected to a hose. The pool features built-in steps on the left side.
Empty, weathered swimming pool with a rough, peeling surface in a backyard, next to a brick house. The pool appears neglected, with a few scattered leaves and a damaged wall.

Golden Isles Pool Renovation Experts

What Your Pool Becomes After Resurfacing

Your pool transforms from an eyesore into the centerpiece of your backyard again. The rough spots that scraped your feet disappear, replaced by smooth surfaces that feel good and look even better.

You’ll spend less time fighting chemical imbalances because modern finishes work with your water, not against it. Stains that wouldn’t budge with any amount of scrubbing become a distant memory.

Your property value jumps. Your maintenance headaches drop. And you can finally invite people over without making excuses about the pool’s condition. That’s what happens when the surface actually does its job right.

Trusted Pool Resurfacing Company

We Know Florida Pool Surfaces

DCPP Services has been handling pool resurfacing throughout the Golden Isles area for years. We understand how Florida’s climate, from intense UV rays to sudden storms, beats up pool surfaces faster than anywhere else.

We know which finishes actually hold up in this environment and which ones fail within a few seasons. We’ve seen every type of surface problem that develops in coastal Florida pools.

When you call DCPP Services, you’re working with contractors who’ve solved these exact problems hundreds of times before in your area.

A construction worker wearing a blue and gray cap and reflective jacket smooths out a concrete surface with a trowel. The worker is kneeling and focused on the task. The setting appears to be a construction site.

Pool Resurfacing Process Florida

Here's How Your Pool Gets Resurfaced

First, the existing surface gets completely removed down to the shell. This isn’t a patch job – everything comes off so you start with a clean foundation.

Next, any structural issues get addressed. Cracks get properly repaired, plumbing problems get fixed, and the shell gets prepped for the new surface.

Then the new finish goes on. Whether you choose plaster, aggregate, or another material, it gets applied in layers and properly cured. The whole process typically takes 7-10 days, depending on your pool size and chosen finish.

You end up with a surface that should last 15-20 years with normal care. No shortcuts, no band-aids – just a complete renewal of your pool’s foundation.

Workers in boots and jeans use long-handled rollers to apply a white coating to a surface. One worker is holding a spray hose. The scene is well-lit, suggesting an outdoor setting or brightly lit indoor area. Shadows are cast on the coated surface.

Ready to get started?

Explore More Services

About DCP Pool Services

Get a Free Consultation

Swimming Pool Surface Restoration

What's Included in Pool Resurfacing

Complete surface removal and disposal of old materials. Structural inspection and repair of any cracks or damage found in the shell. Professional application of your chosen finish material.

The process includes updating any outdated plumbing connections and ensuring proper water circulation. You get options for texture, color, and finish type based on your budget and preferences.

All work comes with material and labor warranties. The job site gets cleaned up completely – you won’t find chunks of old plaster in your landscaping weeks later. Most Golden Isles homeowners are surprised how clean the process actually is when done right.

Aerial view of an empty rectangular swimming pool with no water, surrounded by lounge chairs and a palm tree casting a shadow. The pool area is bordered by a modern building and patio space with geometric designs.
Most pool resurfacing projects in the Golden Isles area take 7-10 days from start to finish. The timeline depends on your pool size, chosen finish, and weather conditions. Florida’s humidity can extend curing times slightly, especially during summer months. You’ll need to keep the pool empty for the first few days, then there’s a filling and startup process that takes another 2-3 days. Plan for about two weeks total before you’re swimming again, just to be safe.
Aggregate finishes typically perform best in Florida because they resist algae growth and handle chemical fluctuations better than standard plaster. Pebble and quartz finishes also hold up well against UV damage and salt air in coastal areas like Golden Isles. Standard white plaster is the most budget-friendly option but may need replacement sooner in Florida’s harsh conditions. The key is choosing a finish that matches your maintenance style and budget – there’s no one-size-fits-all answer.
Pool resurfacing costs in the Golden Isles area typically range from $6,000 to $15,000, depending on your pool size and chosen materials. Standard plaster runs on the lower end, while premium aggregate finishes cost more upfront but often last longer. Additional repairs discovered during surface removal can add to the total cost. We provide detailed estimates after inspecting your pool in person, since every situation is different. Factor in the long-term value – a quality resurface job should last 15-20 years.
Rough surfaces that scrape your feet are the most obvious sign your pool needs resurfacing. Other indicators include stains that won’t clean off, visible cracks or chips in the surface, and constant chemical balance problems. If your pool surface is over 15 years old and showing multiple issues, resurfacing usually makes more sense than continued patching. Waiting too long can lead to structural damage that costs much more to fix than a standard resurface job.
Pool resurfacing can be done during Florida’s rainy season, but it requires more careful scheduling and weather monitoring. Rain can disrupt the curing process and extend project timelines significantly. We prefer working during drier months when we can better control conditions. If you need resurfacing during summer, expect potential delays and we’ll discuss weather contingency plans with you upfront. The work can be done – it just takes more patience and flexibility with scheduling.
Basic pool resurfacing typically doesn’t require permits in most Florida jurisdictions, since you’re not changing the pool’s structure or size. However, if additional plumbing work or electrical updates are needed, permits may be required. Some homeowners associations have their own approval processes for pool work. We know local requirements and handle any necessary paperwork. It’s always worth checking with your local building department if you’re unsure about permit requirements for your specific situation.