Pool Resurfacing in Sapphire Sound, FL

Stop Worrying About Your Pool Surface

Professional pool resurfacing that actually lasts in Florida’s brutal climate, with surfaces safe for bare feet and water that stays balanced.

Professional Pool Resurfacing Sapphire Sound

Your Pool, Safe and Beautiful Again

You get a pool surface that feels smooth under your feet instead of rough like sandpaper. No more scrapes or cuts from deteriorated plaster that’s been eating away at your family’s comfort for months.

Your water chemistry finally stabilizes because the surface isn’t constantly shedding material into your filtration system. You stop fighting pH battles and algae blooms that never seem to end with old, porous surfaces.

The transformation goes deeper than looks. You get 15 years of durability when the work is done right, not three years of patches that fail when Florida’s weather hits them hard.

Pool Company Sapphire Sound Florida

We Know South Florida Pool Problems

We’ve been handling pool resurfacing projects throughout Broward County for years. We understand exactly what Florida’s climate does to pool surfaces and how to build finishes that last.

Every project gets the same thorough approach: proper surface preparation, quality materials that can handle UV exposure and temperature swings, and installation techniques that prevent the common failures other contractors miss. We’re fully licensed, insured, and hold CPO certification because your family’s safety matters.

Sapphire Sound pool owners deal with specific challenges like salt air exposure and UV damage that accelerate surface deterioration. The materials and techniques we use account for these local conditions, not just generic approaches that might work elsewhere but fail here.

Pool Resurfacing Process Broward County

How We Resurface Your Pool Right

First, the existing surface gets completely removed down to the structural shell. This isn’t a patch job – everything that’s damaged, loose, or compromised comes out. You’ll see exactly what condition your pool structure is in.

Next comes surface preparation and any necessary structural repairs. Cracks get properly sealed, the surface gets cleaned and prepped for maximum adhesion. This step determines whether your new surface lasts 15 years or starts failing in three.

Finally, your chosen finish gets applied using proven techniques that create a smooth, durable surface. Whether you choose plaster, Diamond Brite, or pebble finishes, the installation follows manufacturer specifications and industry best practices. The pool gets filled, chemicals balanced, and you get clear instructions for the critical first few weeks of care.

Ready to get started?

Explore More Services

About DCP Pool Services

Get a Free Consultation

Swimming Pool Services Sapphire Sound

Built for Florida's Brutal Climate

Your pool resurfacing includes complete removal of the old surface, structural assessment and repairs, professional surface preparation, and installation of your chosen finish material. You get quality materials designed for Florida’s climate and proper application techniques that ensure longevity.

The process also covers startup procedures, chemical balancing, and detailed care instructions for the first month. This curing period is critical – skip these steps and even the best materials can fail prematurely. You’ll know exactly what to do and when to do it.

In Broward County’s climate, where pools get year-round use, durability matters. You’re not just paying for today’s appearance – you’re investing in surfaces that perform well for decades. We use materials specifically chosen to withstand Florida’s sun, humidity, and occasional storms that can destroy inferior work.

How long does pool resurfacing take in Sapphire Sound, FL?

Most pool resurfacing projects in Sapphire Sound take 5-7 days from surface removal to refilling, but weather can extend this timeline. The actual surface application happens in one day, but proper preparation and curing can’t be rushed. Rain delays are common during Florida’s wet season, so plan for some flexibility in scheduling. You’ll get a realistic timeline upfront based on your specific pool size, chosen finish, and current weather patterns. The curing process continues for about 30 days after refilling, during which you’ll need to follow specific water chemistry guidelines we provide.

What pool resurfacing materials work best in Florida?

Standard plaster is the most affordable option but typically lasts 7-10 years and shows stains more easily. Diamond Brite and aggregate finishes mix plaster with materials like quartz or pebbles, providing better durability and stain resistance for 12-15 years. Premium finishes like pure quartz offer the longest lifespan (15-20 years) and best appearance retention, but cost significantly more upfront. In Florida’s climate, the extra investment in aggregate or premium finishes usually pays off through reduced maintenance and longer replacement cycles. The choice depends on your budget, expected time in the home, and maintenance preferences.

Can you keep existing tile during pool resurfacing?

Yes, but it depends on the tile’s condition and how it was originally installed. If your existing tile is in good shape and properly adhered, resurfacing can work around it. However, many pools need tile replacement because the adhesive fails over time, particularly in Florida’s climate conditions. Sometimes removing old surface material damages tile that looked fine initially. We’ll assess your tile during the inspection and let you know if it can be preserved or needs replacement for the best long-term results.

How much does pool resurfacing cost in Broward County?

Pool resurfacing costs in Broward County range from $5,000 to $15,000 depending on pool size, material chosen, and any additional repairs needed. Larger pools require more materials and labor, while premium finishes like Diamond Brite or pebble cost more than standard plaster. The final price also depends on prep work required – pools with significant damage need more extensive preparation. We provide transparent estimates upfront so you know exactly what you’re paying for. Remember, quality resurfacing is an investment that prevents more expensive repairs and extends your pool’s life significantly.

What are signs my pool needs resurfacing?

Rough surfaces that scrape swimmers’ feet are the most obvious sign – if your pool feels like sandpaper, it’s time. Visible cracks, even hairline ones, can quickly expand in Florida’s climate and lead to serious structural issues. Other warning signs include persistent stains that won’t brush away, constant water chemistry battles, peeling or flaking surface material (spalling), and water loss that might indicate leaks. If you’re constantly fighting algae blooms or pH imbalances, a deteriorating surface could be making water maintenance much harder than it should be.

Do you offer warranties on pool resurfacing work?

Yes, we provide comprehensive warranties on both materials and workmanship because we stand behind our work. The specific warranty terms depend on the finish material chosen – premium finishes typically come with longer warranty coverage. We’re fully licensed and insured professionals who understand Florida pool regulations and safety requirements. Our warranties cover defects in workmanship and material failures, giving you peace of mind that your investment is protected. We’ll explain all warranty details during your consultation so you know exactly what’s covered and for how long.

Local Resources

Sapphire Sound, FL is located in Broward County in Florida State