Pool Resurfacing in Silver Shores, FL

Transform Your Aging Pool Surface

Stop dealing with rough, stained surfaces that cut your feet and embarrass you when guests come over.

Swimming Pool Renovation Silver Shores

What Your Pool Looks Like After

You’ll have a smooth, beautiful surface that feels good under your feet. No more rough spots that scrape your skin when you push off the wall.

The staining and discoloration that made you avoid hosting pool parties? Gone. Your pool looks like it belongs in a resort, not like something you’re embarrassed to show neighbors.

You’ll spend less time fighting algae buildup and balancing chemicals. New surfaces don’t harbor bacteria and contaminants like old, porous ones do. Your water stays cleaner with less effort and fewer chemicals.

Pool Resurfacing Company Silver Shores

We Know Florida Pool Surfaces

DCPP Services has been handling pool resurfacing projects throughout Silver Shores and surrounding South Florida communities. We understand how Florida’s year-round sun, humidity, and constant pool use affects different surface materials.

We’ve seen every type of surface failure – from basic plaster breakdown to aggregate separation to tile problems. This experience means we can spot potential issues before they become expensive problems.

Our team focuses on getting the prep work right the first time. Most surface failures happen because corners were cut during preparation, not because the finish material was bad.

Pool Remodeling Process Silver Shores

Here's How We Handle Your Project

First, we drain your pool completely and remove the old surface material. This isn’t just scraping – it’s removing everything down to the structural shell to ensure proper adhesion.

Next comes surface preparation. We repair any cracks in the underlying structure, check plumbing connections, and make sure the surface is properly primed. This step determines how long your new surface will last.

Then we apply your chosen finish material. Whether you want traditional plaster, exposed aggregate, or specialty finishes, the application happens in one continuous process to avoid seam lines or weak spots. The surface cures for several days before filling begins.

Finally, we balance the water chemistry and walk you through proper maintenance for your specific surface type. Different finishes have different care requirements, especially in the first few weeks.

Ready to get started?

Explore More Services

About DCP Pool Services

Get a Free Consultation

Pool Finishes Silver Shores FL

What's Included in Your Resurfacing

You get complete surface removal and replacement, not just a coating over existing problems. This includes repairing any structural cracks or plumbing issues discovered during prep work.

The service covers multiple finish options based on your budget and preferences. Standard white plaster works for basic needs, while aggregate finishes provide more durability and visual appeal. Premium options include glass bead finishes and custom color combinations.

All work includes proper water chemistry balancing and a detailed maintenance guide specific to your new surface. We also handle permits and inspections required by Silver Shores building codes. The project includes cleanup and disposal of old surface materials.

How long does pool resurfacing take in Silver Shores?

Most pool resurfacing projects take 5-7 days from start to finish, depending on your pool size and chosen finish. The actual surface application happens in one day, but prep work takes 2-3 days and curing takes another 3-4 days. Weather can extend the timeline since humidity affects curing, especially during Florida’s rainy season. You’ll need to keep the pool empty during this time, so plan accordingly if you have pool parties or events coming up.

What pool finishes work best in Florida's climate?

Aggregate finishes perform exceptionally well in Florida because they resist UV damage and handle constant use better than basic plaster. Exposed aggregate or glass bead finishes last 15-20 years compared to 7-10 years for standard plaster. They also resist staining from organic matter and algae, which is important given Florida’s year-round growing season. The slightly textured surface provides better grip for safety but isn’t rough enough to cause discomfort. Premium finishes cost more upfront but save money long-term through reduced maintenance and longer lifespan.

How much does pool resurfacing cost compared to replacement?

Pool resurfacing typically costs 60-70% less than full pool replacement while giving you essentially the same result. Resurfacing runs $3,000-$8,000 depending on size and finish choice, while pool replacement starts around $25,000-$40,000. If your pool structure is sound, resurfacing makes financial sense. The new surface will last 15-20 years with proper maintenance, giving you decades more pool enjoyment. Most Silver Shores homeowners choose resurfacing because it delivers the aesthetic and functional improvements they want without the massive expense and construction disruption of replacement.

Can you resurface pools with existing tile or coping issues?

Yes, resurfacing projects often include tile and coping repairs or replacement. Damaged tile around the waterline usually needs replacement anyway since old adhesive and grout harbor bacteria and affect water chemistry. Coping problems like cracking or separation get addressed during surface prep work. This is actually the ideal time to upgrade these elements since the pool is already drained and prepped. Coordinating everything together saves money compared to separate projects and ensures all materials cure and seal properly together.

What maintenance does a newly resurfaced pool require?

New pool surfaces need special care for the first 30 days while the finish fully cures. You’ll brush the surface daily to remove plaster dust and keep water chemistry perfectly balanced – slightly lower pH and alkalinity than normal. Avoid automatic pool cleaners and harsh chemicals during this period. After the initial curing, maintenance becomes easier than your old surface. The smooth, non-porous finish resists algae and staining, so you’ll use fewer chemicals and spend less time cleaning. Most finishes just need regular brushing and balanced water chemistry to stay beautiful for decades.

Do you handle permits and inspections for Silver Shores projects?

Yes, DCPP Services handles all permit applications and coordinates inspections required by Silver Shores building codes. Pool resurfacing typically requires permits since it involves structural work and affects water quality systems. The permit process takes 1-2 weeks, so we start paperwork before beginning work to avoid delays. We’re familiar with local inspector requirements and make sure everything meets or exceeds code standards. This includes proper surface preparation, material specifications, and water chemistry balancing. You don’t need to deal with any of the bureaucratic aspects – we handle it all as part of the service.

Local Resources

Silver Shores, FL is located in Broward County in Florida State