Pool Resurfacing in Sunrise Key, FL

Transform Your Aging Pool Surface Today

Get your pool back to pristine condition with professional resurfacing that lasts.

A worker in protective gear sprays a white coating on the interior of an empty swimming pool. He stands on the pool floor while holding a spray gun connected to a hose. The pool features built-in steps on the left side.
Empty, weathered swimming pool with a rough, peeling surface in a backyard, next to a brick house. The pool appears neglected, with a few scattered leaves and a damaged wall.

Professional Pool Resurfacing Services

Your Pool Will Look Brand New Again

Your pool surface tells the story of every summer barbecue, every morning swim, every hurricane season. Over time, that story becomes visible in rough patches, stains, and worn-down areas that make your backyard centerpiece look tired.

Professional pool resurfacing changes that narrative completely. You’ll have a smooth surface that feels good under your feet again. The water will look crystal clear against fresh, clean walls. Your property value gets an immediate boost from what essentially becomes a pool makeover.

Most importantly, you’ll stop worrying about whether your pool looks presentable when friends drop by. Instead of explaining away the rough spots or discoloration, you’ll be proud to show off your backyard oasis.

Broward County Pool Professionals

Local Experts Who Actually Show Up

DCPP Services has been maintaining pools throughout Broward County for years, and we’ve seen what works and what doesn’t in Florida’s unique climate. We hold CPO certification, which means our technicians understand proper chemical balance, surface preparation, and application techniques.

We’re the pool company that actually answers the phone and shows up when scheduled. In Sunrise Key, where salt air and intense sun create specific challenges for pool surfaces, we’ve developed proven methods that hold up to local conditions.

Our team focuses on upfront pricing and clear communication because we know pool owners have been burned by contractors who disappear mid-project or add surprise charges.

A construction worker wearing a blue and gray cap and reflective jacket smooths out a concrete surface with a trowel. The worker is kneeling and focused on the task. The setting appears to be a construction site.

Pool Resurfacing Process Explained

Here's Exactly What Happens Next

First, we drain your pool completely and remove the old surface material. This isn’t a quick sandblasting job – we carefully strip away damaged areas while preserving the structural integrity underneath.

Next comes surface preparation, which determines how well your new finish will bond and last. We clean, etch, and prime the surface according to manufacturer specifications and local building codes. This step takes time, but it’s what separates a professional job from a quick fix.

Finally, we apply your chosen finish material in controlled conditions. Whether you’re going with plaster, pebble, or tile, the application happens when weather conditions are optimal. The curing process takes several days, during which we monitor chemical levels and surface development. You’ll get clear instructions on when it’s safe to swim again.

Workers in boots and jeans use long-handled rollers to apply a white coating to a surface. One worker is holding a spray hose. The scene is well-lit, suggesting an outdoor setting or brightly lit indoor area. Shadows are cast on the coated surface.

Ready to get started?

Explore More Services

About DCP Pool Services

Get a Free Consultation

Pool Surface Options Available

Choose the Right Finish for Florida

Pool resurfacing in Sunrise Key means selecting materials that can handle saltwater exposure, intense UV rays, and frequent temperature changes. Standard plaster works for basic applications, but many homeowners opt for aggregate finishes that resist staining and provide better durability.

Pebble finishes have become popular in waterfront communities because they create natural-looking surfaces that complement coastal aesthetics. They also provide better traction, which matters when pools get heavy use from family and guests.

The choice depends on your budget, desired appearance, and how long you plan to stay in your home. We walk you through the options without pushing expensive upgrades you don’t need. We’ll explain which finishes perform best in your specific environment and usage patterns.

Aerial view of an empty rectangular swimming pool with no water, surrounded by lounge chairs and a palm tree casting a shadow. The pool area is bordered by a modern building and patio space with geometric designs.
Most pool resurfacing projects in Sunrise Key take 5-7 days from start to finish, but weather plays a big role in timing. Florida’s afternoon thunderstorms can delay application, and high humidity affects curing time. The actual work breaks down like this: one day for draining and surface removal, 1-2 days for preparation and priming, one day for finish application, and 3-5 days for curing before you can swim. We monitor weather forecasts carefully and schedule application during optimal conditions. During hurricane season, projects may take longer due to weather delays. We communicate timeline changes upfront so you can plan accordingly.
Florida’s climate creates perfect conditions for pool surface breakdown. Intense UV radiation breaks down chemical bonds in pool finishes, while salt air from the ocean accelerates corrosion processes. High temperatures cause expansion and contraction cycles that create micro-cracks over time. These cracks allow water to penetrate behind the surface, leading to delamination and rough patches. Frequent rain also affects chemical balance, which can etch and stain surfaces. In Sunrise Key specifically, the combination of saltwater proximity and heavy pool usage during extended swimming seasons means surfaces wear out faster than in other climates. Most pool finishes here need replacement every 8-12 years depending on maintenance and usage.
Pool resurfacing costs in Broward County typically range from $4,000 to $15,000 depending on pool size, surface material, and current condition. Basic plaster refinishing costs less, while premium aggregate or tile finishes cost more but last longer. The total includes surface removal, preparation, materials, and labor. Additional costs may apply if structural repairs are needed or if your pool has unusual features. We provide upfront pricing after inspecting your specific situation. Financing options are available for larger projects. Remember that resurfacing is an investment in your property value – a well-maintained pool can add significant value to homes in waterfront communities like Sunrise Key.
No, your pool will be out of commission during the entire resurfacing process. The pool needs to be completely drained, and the new surface requires several days to cure properly before it’s safe for swimming. Plan for 5-7 days without pool access, though weather delays can extend this timeline. Many Sunrise Key residents schedule resurfacing during cooler months when pool usage naturally decreases. We coordinate the timeline to minimize disruption to your routine. We’ll let you know exactly when work begins and when you can expect to swim again. The wait is worth it – you’ll have a pool surface that looks and feels brand new.
Pool replastering specifically refers to applying a new plaster coat over the existing surface, while pool resurfacing is a broader term that includes any new surface material – plaster, aggregate, tile, or other finishes. Replastering works when the underlying structure is sound and you’re happy with basic white plaster. Resurfacing gives you options for different colors, textures, and materials that offer better durability and appearance. In Sunrise Key’s harsh climate, many homeowners choose aggregate resurfacing over simple replastering because it lasts longer and resists staining better. We evaluate your current surface and recommend the most cost-effective approach for your situation.
Several signs indicate it’s time for pool resurfacing. Rough patches that catch on swimsuits or scrape feet are the most obvious indicator. Staining that won’t come clean with normal maintenance also signals surface deterioration. Check for areas where the surface feels hollow when tapped – this indicates delamination where the finish has separated from the shell. Frequent algae problems despite proper chemical maintenance often mean the surface has become too porous to clean effectively. If your pool is 8-12 years old and showing multiple symptoms, resurfacing is likely more cost-effective than continued repairs. We offer free evaluations to help you determine whether resurfacing is necessary or if other maintenance can extend your current surface’s life.